| |
| |
| X431 Tool-Infinite display program V14.32 |
| X431 Tool-Infinite display program V14.32
This version is available in 24 languages
Compared with the previous version, the following contents are added/improved:
1. If there is not a certain maker software in corresponding language present, (for example, you can't find the BMW software in Finnish under the Finnish operating system), the new display program will call the software in English version and display it in English.
2. Solved the problem of the system halted in the event that the printer is uninstalled or unselected while you press the print button.
3. Added the X axis of time when displaying one datastream wave only.
Note: if you would use Swedish, please update X431 operating system V10.87 or advanced version.
Bulletin about Download Software:
Because of optimization for software configuration, please must download display program V14.13 or advanced version to match the diagnostic software issued after Sep. 20, 2006.
If you want to use the software released before and after Sep. 20, 2006 in one CF card, please refer to the ways below:
1. Use the display program V14.13 or advanced version to match the software released after Sep, 20, 2006.
2. Use the display program V14.12 to match the software released before Sep, 20, 2006.
How to toggle new/old Display program version:
After powering on the X-431, the system will run the display program V14.32 automatically. If you want to use display program V14.12, please click the “PRE” button at the bottom of the screen, then choose the “software issued before Sep, 20, 2006” icon, the following operation is as the same as before.
| | | author: Published at: 10/31/2009 10:06:27 AM |  |
|
|
|
|
