|
|
|
 Home ProductsOthers |
Product Name : |
|
Honda CR-V, K6 & K8 Rear Trailing Arm Bush Remover / Install |
|
Product Number : |
|
R7001 |
|
|
|
|
Specifications/Features :
| . |
FOR REPLACEMENT OF HONDA CR-V, K6 & K8 THE REAR TRAILING ARM BUSH. |
| . |
ON CAR MAINTENANCE. |
| . |
BEST TOOL FOR REPLACEMENT OF THE BUSH ON HONDA CR-V, K6 & K8. |
| . |
NO DAMAGE TO ABS SENSOR CABLE, TRAILING ARM, AND PARTS CLOSE TO BUSH DURING THE MAINTENACE. |
| . |
HOOK DESIGNE TO MOUNT THE TOOL ON TRAILING ARM SECURELY. |
| . |
WINDOW INDICATOR FOR REFERENCE WHILE REMOVING AND INSTALLING. |
| . |
FAST AND EASY TO USE. SAVE TIME, WITHIN TWO MINUTES FOR REMOVAL. |
| . |
APPLICABLE: Honda Civic 1988-2000, Del Sol 1993-1997, CR-V 1997-2002, Acura Integra 1994-2001 |
| GENERAL INTRODUCTION FOR BUSH |
A FLEXIBLE BUSH HAS AN ELASTOMERIC ELEMENT ENCLOSED BETWEEN AN OUTER SLEEVE AND A CENTRE AXIS TO ENSURE BETTER ROAD GRIP AND STABILITY.
MAKES DRIVING MORE COMFORTABLE |
| |
| REMOVAL NOTE: THE WINDOW INDICATION IS FOR REFERENCE DURING REMOVAL AND INSTALLATION. |
| STEP 1: |
MOUNT THE TOOL ON CR-V REAR TRAILING ARM. PLEASE REFER TO THE REMOVAL ILLUSTRATION FOR GUIDNANCE. |
| STEP 2: |
CHECK THE HOOK AND MAKE SURE THEY ARE SECURELY INSTALLED. |
| STEP 3: |
REMOVE THE BUSH BY ROTATIING THE MAIN BOLT WITH WRENCH OR SOCKET. |
| STEP 4: |
EXTRACT THE BUSH. | |
| |
| INSATLLATION NOTE: CLEAN AND LUBRICATE THE BUSH WITH WD-40 LUBRICANT, RECOMMENDED BEFORE INSTALLATION. |
| STEP 1: |
PUT THE BUSH AND ALIGN IT ON THE REAR TRAILING ARM. |
| STEP 2: |
MOUNT THE TOOL ON CR-V REAR TRAILING ARM. PLEASE REFER TO THE INSTALLATION ILLUSTRATION FOR GUIDNANCE. |
| STEP 3: |
INSTALL THE BUSH BY ROTATING THE MAIN BOLT WITH WRENCH OR SOCKET. |
| STEP 4: |
MAKE SURE THE ALIGNMENT PIN IS TOUCHED WITH THE BODY OF REAR TRAILING ARM. |
| CAUTION: |
STOP ROTATING THE MAIN BOLT WHENEVER THE ALIGNMENT PIN IS TOUCHED WITH THE BODY OF REAR TRAILING ARM. |
| STEP 5: |
REMOVE THE TOOL AND CHECK THE BUSH IS COMPLETELY INSTALLED. | |
|
|
