Product Specifications / Features :
* Features : Used to disconnect the fuel line from the high pressure fuel pump
that is driven by the mechanical connection to the intake camshaft.
* Application : 2007 - 2013 Mini Cooper Turbo models.
* BMW OEM No. ref.: 130250
***WARNING***
If the two little release tabs that stick out have been broken off the fuel line,
The A1688 release pins are not long enough to depress the inner tabs. The only
way to remove the fuel line at this point is to use two small screw drivers and
depress on both sides of the fuel line at the same time to release the line from
the pump. You must replace the fuel line at this point.
*** Some 2010.5 - 2011 Models, You Need To Loosen The 14mm Flare Nut On
The Fuel Rail Feed Line And Remove The Lower 8mm Fuel Pump Retaining
Bolt To Use The Tool. ***
* Features : Used to disconnect the fuel line from the high pressure fuel pump
that is driven by the mechanical connection to the intake camshaft.
* Application : 2007 - 2013 Mini Cooper Turbo models.
* BMW OEM No. ref.: 130250
***WARNING***
If the two little release tabs that stick out have been broken off the fuel line,
The A1688 release pins are not long enough to depress the inner tabs. The only
way to remove the fuel line at this point is to use two small screw drivers and
depress on both sides of the fuel line at the same time to release the line from
the pump. You must replace the fuel line at this point.
*** Some 2010.5 - 2011 Models, You Need To Loosen The 14mm Flare Nut On
The Fuel Rail Feed Line And Remove The Lower 8mm Fuel Pump Retaining
Bolt To Use The Tool. ***
11
11